Heavy Melting Steel 1&2 – (HMS)

Shredded Scrap

Plate & Structural Steel Scrap - (PNS)

Non - Ferrous Scraps

ALUMINIUM

ACSR, Tense, Trump, Troma, Under Ground Cable, AC radiator.

BRASS

Drink / Ebony / Enerv, Elder, Engle, Erin, Grape, Honey, Ivory, Label, Lark, Malon, Nobel etc. - We have clients in north who can take good volume used in sanitary products.

COPPER

Millberry/Berry candy/birch cliff.

PIG IRON

Basic Pig Iron, PL1, PL2, according to GOST 805-95

Chemical composition according to GOST 805-95

In pigs weighing not more than 18 kg
Mass basis – actual
Packing: in bulk, without packing

We are very interested in production of various foundry grades of pig iron with restricted silicon, manganese, sulphur, phosphorus contents.

Our pig iron ingots are very clean, uniform, and contain fewer impurities if compared to other producers. The generation of fines, chips, dust is also less if compared to others.

Therefore our products are sold at a premium price compared to others.

Typical Chemical Composition

CARBON								4,50% MAX
Silicon								4,50% max
Manganese								1,5% max
Phosphorous								0,12% max
Sulfur								0,05% max
WEIGHT RATIO %
		Mn				P, Max			S, Max
		Group 1	Group 2	Group 3	Group 4	Class A	Class 6	Class B	Category 1	Category 2	Category 3	Category 4	Category 5
P1	0,5-0,8	Max 0,5	0,5-1,0	1,0-1,5	0,1	0,1	0,2	0,3	0,1	0,02	0,03	0,4	0,05
PL1	Max 0,5	Max 0,5	0,5-1,1	1,0-1,5	0,1	0,2	0,3	0,1	0,1	0,02	0,03	0,4	0,05
PL2	Max 0,5	Max 0,5	0,5-1,1	1,0-1,5	0,1	0,2	0,3	0,1	0,1	0,02	0,03	0,4	0,05
P2	Max 0,5	Max 0,5	0,5-1,1	1,0-1,5	0,1	0,2	0,3	0,1	0,1	0,02	0,03	0,4	0,05

Granulated Pig Iron

Granulated Pig Iron (GPI) is a refined form of pig iron produced through a process where molten pig iron is rapidly cooled using water, forming small granules instead of traditional pig iron ingots or pigs. This granulation process enhances its handling, storage, and transportation while reducing oxidation and improving efficiency in steelmaking and foundry applications.

GPI is ideal in most metallurgical applications.

BOF – clean material and cuts need for scrap
EAF – continuous charging, no power off, good carbon source, early liquid pool formation & for foaming slag
BF – speeds up hot metal output
AOD & LF – clean iron source with specific analysis
Casting operators – specific analysis & easy to handle

HOT BRIQUETTED IRON (HBI)

Metallization	94.0%
Fe (Total)	88.3–94.0%
Fe (Metallic)	83.0–88.4%
C	0.05 - 0.06
S	0.001–0.03%
P₂O₅	0.005–0.09%
Gangue	3.9–8.6%
Mn, Cu, Ni, Cr, Mo, Sn, Pb, Zn	Traces
Size (typical)	(9–140) x (48–58) x (32–34) mm
Fines & chips	≤ 5.0%
Apparent Density	> 5.0 t/m³
Bulk Density	2.5–3.3 t/m³