SPECIAL STEAL
Defense Application (ARMOUR STEEL)
An Armour Plate with High Hardness and Excellent Ballistic resistance properties, strength and workability. it is guaranteed to keep you safe and secure.
HIGH NITROGEN STEEL (HNS)
Thickness: 3mm-80mm
Chemical Composition
Mechanical Properties:
ARMOUR WITH Minimum Guaranteed Hardness of 500 HB (JD-1)
Thickness: 5mm-80mm
Chemical Composition
Mechanical Properties:
ARMOUR WITH Minimum Guaranteed Hardness of 550 HB (JD-1M)
Thickness: 5mm-80mm
Chemical Composition
Mechanical Properties:
ABRASION RESISTANT/WEAR PLATE
These are an advanced range of higher abrasion and wear resistant plates designed as per hardness level. Produced through cutting-edge Quenched or Quenched & tempered process. Products possess an exceptional combination of higher hardness & toughness, optimally designed chemistry, coupled with superior dimensional tolerances which helps in ease of fabrication. Wear-resistant Steel Plate products for application in Yellow Goods & Mining Equipment (Dump Body Trucks, Bulldozer Buckets, Crushers, Mixers, Loaders, Shovels) and Material Handling Equipment (Chutes, Hoppers, Body Liners).
Dimension Range
GRADE | RH 400 | RH 450 | RH 500 |
Thick | 8-100mm | 8-100mm | 8-100mm |
Width | 1500-4800mm | 1500-4800mm | 1500-4800mm |
Hardness | 360 BHN Min (Typical 360-450) | 425 BHN Min (Typical 425-500) | 470 BHN Min (Typical 470-550) |
YS (MPa Min) | 1100 | 1150 | 1250 |
UTS (MPa Min) | 1250 | 1300 | 1600 |
EL (MPa Min) | 12% | 12% | 10% |
Impact-/toughness Min*2 | 25J(avg), 20J(ind)J at (-40) °C | 25J(avg), 20J(ind)J at (-40) °C | 25J(avg), 20J(ind)J at (-40) °C |
HIGH STRENGTH PLATE
Dimension Range
These plates are very high strength structural steel and can result in greater load-carrying capacities and lighter structures when used in place of conventional structural steels.
Mechanical Properties of S690QL:
SHEET PILE
Sheet piles are thin interlocking steel sheets used to construct a continuous barrier in the ground to retain earth/water. Interlock is typically achieved by clutching the edge of one pile into the previous pile. Vibratory hammers are used to install sheet piles.
U-TYPE SHEET PILE
The Sheet Pile cross-sectional performance values
DIMENSIONS | PER STEEL SHEET PILE | PER EACH METER OF WALL WIDTH | |||||||
Effective Width | Effective Height | Thickness | Cross section | Geometrical moment | Section Modulus × 10-6(m3) | Unit | Section | Geometrical moment | Unit weight (kg/m) |
400 | 170 | 15.5 | 96.99 | 4670 | 362 | 76.1 | 2270 | 38600 | 190 |
The mechanical properties of Sheet Pile
MECHANICAL PROPERTIES | ||
YIELD STRENGTH | TENSILE STRENGTH | ELONGATION |
410 Min | 540 Min | 20 Min |
Z-TYPE
Section product range
